Lining Systems

In partnership with

Trans-Ocean Technology (S) Pte. Ltd.

Authorised Partner of Ohji Rubber & Chemicals Co. Ltd., Japan

Rubber Lining

Corrosion Protection and Abrasion Resistance

The elasticity of rubber and its resistance to chemical, shock, abrasion and pressure has made rubber lining possible.

The advantages of using rubber lining system are its reliable application, lining thickness accuracy and excellent adhesiveness.


  • Chemical Resistance
  • Shock Resistance
  • Abrasion Resistance
  • Pressure Resistance
  • Elasticity


  • Reliable Application
  • Accurate Lining Thickness
  • Excellent Bonding
  • Defect Detection

General Procedure

  1. Surface Treatment
  2. Primer and Adhesive Coating
  3. Rubber Lining
  4. Vulcanization / Curing
  5. Inspection
  6. VI.Painting / Shipping

Flake Lining

Reinforced Corrosion Protective Lining

Flake Lining is anti-corrosive coating systems for severe exposures. Flake compound is made from thermosetting liquid resin mixed with glass flakes in microns thick, and applied in a thickness of 0.5~3.0mm.

Glass flakes as barrier fillers make the coating much more durable and prevent permeability of corrosive substances, as the layers of laminated glass flakes (50~100 layers in 1mm thickness) form a highly impermeable structure.


  • Chemical Resistance
  • Blister Resistance
  • Heat Resistance
  • Thermosetting


  • Work Efficiency
  • Excellent Bonding
  • No Need to Cure
  • Easy to Repair

General Procedure

  1. Surface Treatment
  2. Primer & Adhesive Coating
  3. 1st Flake Lining
  4. 2nd Flake Lining
  5. Inspection
  6. Top coat

FRP Lining

Leak Prevention for Underground Storage Tanks

Degradation or corrosion brought by aging could cause leakage and potentially allow underground storage tanks to leak contaminants.

FRP Lining provides superior corrosion resistance by applying FRP (Fibreglass Reinforced Plastics) over inside surface of tanks. It is improves the durability of tanks and helps to prevent the leakage accident.


After FRP Lining has been completed, it structurally acts as a secondary containment tank inside of the substrate.

FRP Lining shall also be applied as reinforcement for corner of flake lining and for concrete pit.

FRP Resin Materials

Easy application due to room temperature curing. Applicable for both existing and new tanks.

MaterialBase Resin
DR-2000Bis-Type Polyester
DR-8000Novolak-Type Vinylester

Whitebeard Engineering Sdn. Bhd.

2nd Floor, Private Lot 46, Lot 3259, Tabuan Tranquility Phase 3,
TT3 Commercial, Jalan Canna, 93350 Kuching, Sarawak.
Tel: +6082 360676

No. 245, Lot 7864, 1st Floor, Assyakirin Commerce Square,
Jalan Sultan Iskandar, 97000 Bintulu, Sarawak.
Tel: +6086 335355